Need Gas Work Done?
Get It Done Safely and Properly.
Whether you’re connecting a new gas appliance, replacing an old one, adding a bayonet point or dealing with a suspected gas problem, I provide licensed gas fitting for homes across Adelaide’s western and coastal suburbs.
You’ll deal directly with me, and I’ll explain what needs doing before any work starts.
LOCAL FAMILY BUSINESS | Speak directly with Dan | Honest advice and practical solutions
Gas fitting isn't only for when something goes wrong
Sometimes you need a gas fitter because you’re installing, replacing or moving something. Other times, you’re calling because something doesn’t seem right.
Installing or changing something?
I can help with gas appliance connections and disconnections, cooktops, ovens, bayonet points and other residential gas fitting work.
Something doesn't seem right?
If you've noticed a gas smell, an appliance isn't operating normally or you're concerned about an existing gas connection, I can investigate the problem, test where required and explain what needs to happen next.
Signs your gas system needs attention
You can smell gas
A gas smell in or around the property should always be taken seriously.
An appliance isn't working normally
Changes in ignition, flame or performance can indicate that something needs attention.
You've replaced or moved an appliance
Gas appliances need to be connected correctly and checked before use.
Old or damaged gas connections
Age, deterioration or physical damage can affect pipework, valves and appliance connections.
You're renovating or changing the kitchen
Moving or replacing a gas cooktop, oven or appliance can mean altering or disconnecting existing gas services.
When do you need a licensed gas fitter?
Gas work isn’t something to experiment with yourself. If you’re not sure whether what you’re planning requires gas fitting work, give me a call and tell me what you’re changing.
- Installing or replacing a gas cooktop or oven
- Connecting or disconnecting a gas appliance
- Installing or changing a gas bayonet point
- Altering existing gas pipework
- Investigating a suspected gas leak or connection problem
- Pressure testing or leak testing
- Servicing or repairing a gas appliance
- Making plumbing changes that affect an existing gas installation
Gas appliance connections and replacements
Replacing a gas appliance isn’t always as simple as removing the old one and connecting the new one.
The existing connection, pipework and appliance requirements all need to be considered before the new appliance is put into service.
If you’re replacing a cooktop, oven or another gas appliance, I can disconnect the old appliance, assess the existing gas connection and complete the plumbing work required for the new installation where appropriate.
Gas leak testing, pressure testing and appliance troubleshooting
If you can smell gas, an appliance isn’t operating properly or you’re concerned about an existing gas connection, I can investigate the problem and carry out gas leak and pressure testing where required.
I also service and repair suitable residential gas appliances. I’ll explain what I find, what can be repaired and what needs to happen next.
If the issue falls outside the work I do, I’ll tell you rather than turn it into unnecessary work.
Gas leak testing
Checking for leaks in the gas installation where required.
Pressure testing
Testing the gas installation to help identify faults or confirm integrity.
Appliance servicing & repairs
Servicing and repairing suitable gas appliances and related gas connections.
What happens when I come out?
1. I look at what you're working with
Whether it's a new appliance, an existing connection or a suspected problem, I'll assess the installation first.
2. I explain the work
If something needs changing, repairing, testing or bringing up to standard, I'll explain it before going ahead.
3. I complete the gas fitting work
The agreed gas work is completed safely and in accordance with the requirements that apply to the installation.
4. I check the work before I'm finished
The installation is checked before the job is considered finished.
Gas fitting, testing and appliance services
Gas cooktop connections
Installing or replacing a gas cooktop and making sure the gas connection is suitable for the new appliance.
Gas oven connections
Connection and disconnection of residential gas ovens where gas plumbing work is required.
Gas appliance disconnections
Safely disconnecting appliances that are being removed, replaced or relocated.
Gas bayonet points
Installation, replacement and alteration of gas bayonet connections for suitable appliances.
Gas pipe alterations
Changes to existing residential gas pipework during renovations, replacements or other modifications.
Gas leak & pressure testing
Testing and troubleshooting suspected issues with gas pipework, fittings or connections.
Gas appliance servicing & repairs
Servicing and repairing suitable residential gas appliances and associated gas connections.
Gas cooktop connections
Installing or replacing a gas cooktop and making sure the gas connection is suitable for the new appliance.
Gas oven connections
Connection and disconnection of residential gas ovens where gas plumbing work is required.
Gas appliance disconnections
Safely disconnecting appliances that are being removed, replaced or relocated.
Gas bayonet points
Installation, replacement and alteration of gas bayonet connections for suitable appliances.
Gas pipe alterations
Changes to existing residential gas pipework during renovations, replacements or other modifications.
Gas leak & pressure testing
Testing and troubleshooting suspected issues with gas pipework, fittings or connections.
Gas appliance servicing & repairs
Servicing and repairing suitable residential gas appliances and associated gas connections.
A licensed gas fitter,
not a call centre.
When you call Wakeline, you’re dealing directly with me.
I’m the person who answers your questions, comes to your property and does the work.
If something needs fixing, I’ll explain why. If the existing setup is fine, I’ll tell you that too. And if what you’re asking for falls outside the work I do, I’ll tell you rather than trying to turn it into a job.
Direct communication with Dan
Licensed residential gas fitting
Straight advice before work starts
Local gas fitting across Adelaide's western and coastal suburbs
Wakeline Plumbing is based in Taperoo and provides residential gas fitting, testing and gas appliance services across Adelaide’s western and coastal suburbs.
Taperoo • Largs Bay • North Haven • Semaphore • Port Adelaide • West Lakes • Henley Beach • Woodville and surrounding areas.
If you’re replacing a gas appliance, planning some work or you’re concerned about an existing gas connection, give me a call and tell me what’s going on.
Gas Fitting FAQs
Do I need a licensed gas fitter to install a gas cooktop?
Yes. Connecting or altering a gas supply for a cooktop is licensed gas fitting work. If you’re replacing a cooktop, I can assess the existing connection and complete the gas plumbing required for the new appliance.
Can you disconnect an old gas appliance?
Yes. I can safely disconnect gas appliances that are being removed or replaced and deal with the existing connection appropriately.
Do you install gas bayonet points?
Yes. I can install, replace or alter residential gas bayonet points where suitable.
Can you move a gas connection during a renovation?
Depending on the existing installation and what you’re changing, gas pipework and appliance connections can often be altered. I’ll assess the setup and explain what’s required.
What should I do if I smell gas?
Treat a gas smell seriously. Avoid flames or anything that could create an ignition source. If you can safely do so, turn off the gas supply and move away from the affected area. For an immediate or significant gas emergency, contact the appropriate emergency gas service.
Do you do gas leak testing and pressure testing?
Yes. I can investigate suspected gas problems and carry out gas leak and pressure testing where required to help identify faults or confirm the condition of the installation.
Do you service and repair gas appliances?
Yes. I can service and repair suitable residential gas appliances as well as handle the associated gas connections and pipework. If you’re having trouble with an appliance, tell me what’s happening when you call and I’ll let you know whether it’s something I can help with.
Can you check a gas connection that doesn't seem right?
Yes. I can assess the gas plumbing, fittings and appliance connection, carry out testing where appropriate and explain what needs attention.
What areas do you service?
Wakeline Plumbing is based in Taperoo and services Adelaide’s western and coastal suburbs, including Largs Bay, North Haven, Semaphore, Port Adelaide, West Lakes, Henley Beach, Woodville and surrounding areas.
Need a Gas Fitter?
Whether you’re installing something new, replacing an old appliance or you’re concerned about an existing gas connection, give me a call and tell me what you need.
You’ll speak directly with me, and I’ll tell you what the job involves before anything starts.
Request a callback
Tell us what gas work you need, what appliance is involved, or what problem you’ve noticed. Dan will get back to you.
Phone: 0403 626 998
Email: contact@wakelineplumbingsolutions.com.au
Licensed & insured plumber
ABN: 25 204 084 108
LICENSE: PGE 307434